Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrason® E 6020 P - PESU - BASF

Check here, which other Ultrason E datasheets, application examples or technical articles are available in Material Data Center

Mechanical properties - Thermal properties - Other properties - Material specific properties

Any use of this information falls under the rules of our disclaimer.

Product Texts

Polyethersulfone flakes, e.g. for membrane applications and coatings.
Abbreviated designation according to ISO 1043-1: PESU

Mechanical properties	dry / cond	Unit	Test Standard
ISO Data
Tensile Modulus	- / 2650	MPa	ISO 527
Yield stress	- / 85	MPa	ISO 527
Yield strain	- / 6.9	%	ISO 527
Charpy impact strength, +23°C	- / N	kJ/m²	ISO 179/1eU
Charpy notched impact strength, +23°C	- / 7.5	kJ/m²	ISO 179/1eA
ASTM Data
Flexural Modulus	2599 / -	MPa	ASTM D 790

Thermal properties	dry / cond	Unit	Test Standard
ISO Data
Glass transition temperature, 10°C/min	225 / *	°C	ISO 11357-1/-2
Temp. of deflection under load, 1.80 MPa	207 / *	°C	ISO 75-1/-2
ASTM Data
Melting Temperature	225	°C	ASTM D 3418

Other properties	dry / cond	Unit	Test Standard
Humidity absorption	1 / *	%	Sim. to ISO 62
Density	1370	kg/m³	ASTM D 792

Material specific properties	dry / cond	Unit	Test Standard
ISO Data
Viscosity number	81 / *	cm³/g	ISO 307, 1157, 1628

Characteristics

Processing

Injection Molding

Delivery form

Powder, Natural Color

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Chemical Media Resistance

Acids
	Acetic Acid (5% by mass) (23°C)
	Citric Acid solution (10% by mass) (23°C)
	Hydrochloric Acid (36% by mass) (23°C)
	Sulfuric Acid (38% by mass) (23°C)
	Sulfuric Acid (5% by mass) (23°C)
Bases
	Sodium Hydroxide solution (35% by mass) (23°C)
	Sodium Hydroxide solution (1% by mass) (23°C)
Alcohols
	Isopropyl alcohol (23°C)
	Methanol (23°C)
	Ethanol (23°C)
Hydrocarbons
	Toluene (23°C)
	iso-Octane (23°C)
Ketones
	Acetone (23°C)
Ethers
	Diethyl ether (23°C)
Mineral oils
	SAE 10W40 multigrade motor oil (23°C)
	SAE 10W40 multigrade motor oil (130°C)
	SAE 80/90 hypoid-gear oil (130°C)
Salt solutions
	Sodium Chloride solution (10% by mass) (23°C)
	Sodium Hypochlorite solution (10% by mass) (23°C)
	Sodium Carbonate solution (20% by mass) (23°C)
	Sodium Carbonate solution (2% by mass) (23°C)
Other
	Ethyl Acetate (23°C)
	DOT No. 4 Brake fluid (130°C)
	Ethylene Glycol (50% by mass) in water (108°C)
	Water (23°C)
	Deionized water (90°C)
	Phenol solution (5% by mass) (23°C)

Application examples
Hollow fiber, water purification system
Membrane filter

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.